The Crossover is ultra light weighing just over 2 pounds, operates under 300psi for a smoother operation that’s easier on internals and paint, comes with break-beam eyes, clamping feedneck, adjustable double-trigger, gas-thru grip, and a mechanical and electronic safety.
The most talked about feature is the Flex Valve technology already seen in the Tippmann Phenom. The Flex Valve allows the used to switch from electronic operation to mechanical operation at the flip of a switch. Want to save battery life during a long scenarioe? The Crossover has you covered. Battery finally dead? No problem. Want to save paint? Done.
The Crossover boasts many unique features and is sure to make many waves in the paintball community for a good time to come.
This Custom Products adapter allows the Apex 2 to be mounted to the CP Tactical line of barrels as well as other barrels with tip threading that is similar such as Tiberius, Lapco, and Hammerhead barrels.
Tip threading follows the 7/8-20 thread pattern and the tip itself measures 4″ long.
Watch out for more innovative upgrades like this one from Custom Products in the future.
Speed Feeds were revolutionized with the introduction of the first Virtue Crown. But with the introduction of the latest generation, dubbed the Crown 2, the features and ease-of-use are at their height.
The Crown 2 for the Dye Rotor uses 10 ultra-soft, replaceable fingers encompass a hard ring that will stand up to the brutal wear of paintball. The silicone elastomer fingers prevents sagging common to other speed feed systems and have the best compression and bend recovery of any current speed feed. Each Crown 2 comes with 10 long and 5 short fingers, so you can decide to use a combination of all long or half long, half short fingers.
You will be able to reload thousands of times without having to worry about the Crown 2 going kaput. Virtue maintains a Lifetime Warranty on the base ring and the easily replaceable fingers come on many different colors and combinations. Customize away!
Oftentimes accessories can get to become a bit much and overload your marker with clutter. So when you want to drop the busy look for a sleek and simple design while retaining performance, take a look at the Trinity Compact Laser. It does its job with the minimum amount of materials and space necessary.
The compact laser features a high quality bright red laser with an ambidextrous push button switch and a remote pressure switch. It is finished in a hard anodized flat black ready to take on the wear and tear of many days of paintball and field days.
This accessory is perfect for any marker and especially pistols. Keep on the lookout for compact and quality accessories from Trinity.
Whether you’re a brand new player who just got their first marker or a seasoned player just looking to upgrade, understanding the mechanics and facts around barrels can lead you to the purchase right for you.
Click the article link and scroll to the bottom of the page to get streamlined facts, advice, and recommendations for a barrel system that you will use and enjoy for a long time.
Don’t just take the quick and dirty from every manufacturer, trust the knowledge from the players who wrote this article. Be smart about your barrels.
We are pleased to announce the introduction of Tippmann Marker Oil and Tippmann Marker Grease. Both are formulated specifically for use in Tippmann markers. The Marker Oil has been developed for use in all Tippmann, U.S. Army, and TPN blow back markers, while the Marker Grease is to be used in FlexValve markers such as the TiPX and Phenom line of markers.
Increase performance and keep your markers running like the day they were unboxed with these new products.
Being that the hammer is much lighter and quicker than the stock hammer it reduces the markers mechanical dwell greatly while giving you a faster trigger pull and drastically reduced kick. This all equates to less time your opponent has to react which in turn leads to more wins for you.
Don’t miss out on this fantastic and worthy upgrade.
TechT has a history of making high-quality products and the Optimus Gauge is no different, sporting a high-visibility background, easy-to-use interface, high and low pressure varieties available, and accurate to 0.1 PSI.
So if you are going to get a gauge, then don’t miss out on this critical piece of equipment.
When you’re having trouble getting your Tippmann marker in that sweet spot range between 280-300 FPS, don’t settle for a less than perfect velocity output. The Trinity velocity spring kit comes with four different springs of varying tension from high, medium, medium low, and low velocity settings to keep your marker shooting consistently at the velocity needed.
Keep your gun safe and consistent with this trusted Trinity product.
Take your TippmannA-5 paintball marker from fast to super fast with the Flasc Rip Clip Adapter. This product allows you to upgrade from the stock air-powered cyclone feed to the BT Rip Clip feed system easily and securely. The BT Rip Clip is battery powered and will feed paint into your marker at a blistering 20 balls per second, making sure you never have to shake and bake or upgrade your A-5 feed again.
Please note that installing this adapter requires the removal of the side hook on the body of your A-5. The BT Rip Clip is not included with this adapter, but any version of the Rip Clip will work great!
Tippmann has finally brought forth what so many have been asking for all these years, a simplified lightweight marker with all the reliability of the Tippmann brand and all the features of their previous models in one well-rounded package.
The Tippmann Crossover is brimming with features including integrated break beam anti-chop eyes, low pressure operation under 300 PSI, integrated grip through gasline with the option to convert to a front regulator, magnetic Hall-Effect trigger switch, multiple adjustable firing modes, including semi-auto, auto-response, 3-shot burst, PSP, NPPL and Millennium, adjustable clamping feedneck with vertical feed, and A-5/X-7 threads.
Although the most exciting feature for players is the Tippmann patented FlexValve technology integrated from the Phenom and now present in the Crossover. The ability to run from electronic to mechanical operation in the middle of a game will be a fantastic feature with the added benefits of the low recoil, low pressure features of the FlexValve. The Crossover is sure to take the game to new heights and new possibilities, don’t be the last to take advantage of this amazing marker.
Add additional functionality to your Tippmann marker and Apex 2 barrel system with the Trinity Apex 2 Shroud with Weaver Rails. Customize your paint-flinging machine and add any Picatinny compatible accessory you wish onto the rails. Lasers, sling mounts, and sights are all possibilities for this versatile system. Not to mention it will give your marker some unique tactical flair.
Trinity is a proven brand you can trust for marker accessories and upgrades. Try it out today.
Looking to add some extra comfort and ease-of-use to your Tippmann marker but don’t have the customizable options necessary? Then it’s time you started looking at Trinity slings and adapters for your marker. First, the Picatinny rail sling adapter allows you to mount your sling points anywhere there are rails on your gun. This gives you a multitude of options when it comes to getting that perfect balanced feeling when fielding your marker.
When you’re done placing your adapter it’s time for you to choose a comfortable sling you can trust. We recommend Trinity 1-point and 2-point bungee slings for their reliability and comfort factor. Use the 2-point if you want that traditional rifle sling feeling that allows for more versatility and mobility or go for a 1-point sling that features tighter maneuvering and crisp marker movement.
Don’t skimp on your comfort and customization, it can set you ahead of your fellow players and increase your performance on the field.
Looking to mount accessories on your Tippmann paintball gun but your hopper keeps getting in the way? Or maybe you just want to customize your shooting platform for comfort and personal preference. With the RAP4 Offset Rail you can do just that, mount flashlights, sights, scopes, carrying handles, and more. This rail will fit all markers with picatinny rails with at least 5 inches of length. Don’t let anything bring down your game. This rail can make your marker work even better for you especially in the thick of the action.