Archive for the ‘TechT Paintball’ Category
Posted by dztechdaniel on March 13, 2012
As we all know Tippmannmarkers have a long maintained reputation for reliability and performance, but sometimes at the cost of slightly more kick. This problem is solved with TechT‘s introduction of the Zero Kick Hammer SE with striker extension.
Being that the hammer is much lighter and quicker than the stock hammer it reduces the markers mechanical dwell greatly while giving you a faster trigger pull and drastically reduced kick. This all equates to less time your opponent has to react which in turn leads to more wins for you.
Don’t miss out on this fantastic and worthy upgrade.
Posted in Paintball Gun Upgrades, TechT Paintball, Tippmann Paintball Guns, Tippmann Sports, US Army Alpha Black Paintball Gun | Tagged: TechT, Upgrades for Tippmann Paintball Guns, Zero Kick Hammer | Leave a Comment »
Posted by dztechdaniel on March 12, 2012
If you’re a technician or just a player who like to fiddle and tweak their equipment, then the TechT Optimus Digital Test Gaugeis a must have in your gear library.
TechT has a history of making high-quality products and the Optimus Gauge is no different, sporting a high-visibility background, easy-to-use interface, high and low pressure varieties available, and accurate to 0.1 PSI.
So if you are going to get a gauge, then don’t miss out on this critical piece of equipment.
Posted in Airsmith and Technical Info, TechT Paintball | Tagged: Digital Test Gauge, High Pressure, Low Pressure, Optimus Gauge, TechT Paintball | Leave a Comment »
Posted by paintballtech on September 6, 2011
The TECHT Tippmann Gun tags is an easy way to upgrade your Tippmann paintball gun. Well maybe it’s not an upgrade as much as an accessory. We have the gun tags in 5 different slogans as seen above.
These are all silver with black lettering and logos. They’ll fit on a Tippmann A5 or a Tippmann X7 paintball gun. Wouldn’t you like your gun to be a little more custom?
Posted in New Releases, Paintball Gun Upgrades, TechT Paintball, Tippmann A5 Paintball Gun, Tippmann X7, Tippmann X7 Phenom Paintball Gun | Tagged: Tippmann A5, Tippmann X7, TechT Paintball, Tippmann, A5, A-5, Tippmann A 5, Tippmann Paintball Gun, X7, X7 Paintball Gun, TechT, paintball, X7 Phenom, Tippmann X7 Phenom Paintball Gun, Tippmann Upgrades, gun tag, upgrades, accessories, tippmann a5 mods | Leave a Comment »
Posted by paintballtech on February 14, 2011
These adapters are a great way to make use of barrels not currently compatible with your marker…compatible. Incorporating a tighter diameter than other brands, the iSwitch creates a seal between the adapter and the marker’s front bolt O-ring. This increases consistency and performance without decreasing your marker’s accuracy or increasing ball breakage. Backwards compatible to all previously manufactured specifications and thread types, each is made of 100% aircraft grade aluminum and micro polished and treated through a custom anodizing process to ensure high performance and durability.
iSwitch Barrel Adapter to put Cocker Barrels on an A5 or BT4 Gun
Posted in Barrels, Brands, Paintball Gun Upgrades, TechT Paintball, Tippmann 98 Custom Paintball Gun, Tippmann A5 Paintball Gun, Tippmann Paintball Guns, Tippmann X7, Tippmann X7 Phenom Paintball Gun | Tagged: Barrel Adapter, Barrel Adaptor, iSwitch Adapter, iSwitch Adaptor, Switch adapter, switch barrel adapter, TechT Adapter, TechT Barrel, TechT Barrel Adapter, TechT ISwitch, TechT iSwitch Barrel Adapter, TechT switch | Leave a Comment »
Posted by paintballtech on December 31, 2010
For all you Phenom owners, this air fitting will provide you much more consistency and an improved feed rate over the standard fitting. And since it is made of stainless steel, it’s also a lot more durable.
Techt Phaze 5 Cyclone Feed Air Fitting
Posted in Brands, New Releases, Paintball Gun Upgrades, Paintball Guns, TechT Paintball, Tippmann Paintball Guns, Tippmann X7 Phenom Paintball Gun | Tagged: Cyclone Air Fitting, Cyclone Feed, Phase 5, Phaze 5, Phenom Air Fitting, Phenom Air Phenom, Phenom Phaze 5, Phenom Upgrade, TechT Air Fitting, TechT Cyclone Phenom, TechT Phaze 5, TechT Phaze 5 Cyclone Feed Air Fitting, TechT Phaze 5 X7, TechT Phenom, TechT Phenom Phaze 5, TechT Tippmann, TechT X7, TechT X7 Phenom, Tippmann Air Fitting, Tippmann Upgrade | Leave a Comment »
Posted by paintballtech on May 22, 2010
Posted in New DeSignz, Paintball Gun Upgrades, TechT Paintball, Tippmann Paintball Guns, Tippmann Sports, Uncategorized, US Army, US Army Carver One | Tagged: carver one bolt, carver one foregrip, carver one hammer, carver one paintball gun upgrades, carver one upgrades, foregrip, paintball, paintball gun upgrade, Recreational Paintball, Tippmann, Tippmann Carver One, tippmann carver one paintball gun, tournament paintball, US Army, US Army Carver One, us army carver one paintball gun, us army carver one paintball gun upgrades, US Army Paintball, us army zero kick hammer, Zero Kick Hammer | Leave a Comment »
Posted by paintballtech on July 23, 2009
The Roc Stock is another great product from KillJoy Industries. This stock has the ability to be offset to the right or left side, allowing for greater mask clearance. Since it is able to be quickly adjusted with one hand, you can quickly set up one of the 36 possible configurations on the fly. Made of high grade machined Aluminum, the Roc Stock is made to last. The Roc Stock is currently available for the Tippmann A5 and X7.
The Zero Kick ACT Hammer from TechT is an upgraded hammer for any Tippmann ACT gun. Because of its 58% weight reduction from the stock hammer, the Zero Kick ACT Hammer gives you much less reciprocating mass inside the gun. This means the gun kicks less and cycles faster, which will help to improve your accuracy and your rate of fire.
Have your A5 or Model 98 professionally refinished by Conlee Custom with a DuraCoat camouflage. These patterns are gorgeous. They’ll make your gun STAND OUT off the field and BLEND IN on the field. If you’re adding this service to a gun you’re purchasing from us then it takes about 2 additional weeks for your gun to arrive to you. Expedited shipping and service is not available at this time. DuraCoat is a two part chemical coating. DuraCoat was specifically made for firearms so it easily stands up to the wear and tear of paintball. With normal use, a marker will last several lifetimes when refinished with DuraCoat. This service was available for the X7, but is now also available for the A5 and 98 Custom. It is available in Digital Woodland, Digital Desert, Digital Urban, MC Heavy Green, and Army ACU.
IVT – Integrated Valve Technology CO2 Tanks are the newest innovation from JT USA. The IVT CO2 tank features an internal magnetic float which represents your liquid CO2 fill level on the indicator strip. This allows you to know when you are running low so you don’t ever have to lose another game because you are out of gas. Also, the valve is located internally in the neck of the tank so even if you screw off the top of the tank, there is no chance of the tank shooting off and injuring anyone. These tanks will be a hot item at TippmannParts.com and are available in 9oz, 12oz, 20oz, and 24oz.
Posted in New Releases, Paintball Gun Upgrades, TechT Paintball, Uncategorized | Tagged: 98 Custom, 98 Custom Platinum Series, A-5, A5, ACT, ACT Zero Kick, ACT Zero Kick Hammer, Camoflauge, Conlee, Duracoat, Finish, IVT, IVT Co2 Tank, IVT Tank, Kill Joy, KillJoy, Platinum Series, Roc Stock, RocStock, Tech T, TechT, Tippmann 98, Tippmann A 5, Tippmann A5, Tippmann X7, X7, zero kick, Zero Kick Hammer | Leave a Comment »
Posted by paintballtech on May 12, 2009
The newest version of the TechT Zero Kick Hammer for Tippmann Paintball Guns comes packaged with a new hammer drive spring. If you did not receive this drive spring and you think your marker needs it, please contact TechT. They will send you the drive spring for free. If you did not receive one, there is no need to freak out immediately. You may not need it. TechT found that some users’ markers needed a stiffer spring in order to get up to 300FPS. Most markers didn’t, but some did, so they started to include it with the hammer.
With that said, below are the instructions on how to install the hammer. Again, I would first set it up with your stock hammer drive spring. If you can not achieve high enough velocity or your cyclone is not cycling you will then need to swap out your stock spring for the stiffer one from TechT.
If you need to contact TechT for the stiff hammer drive spring please call – 901-405-1848 ex.11
For complete installtion instructions, visit the TechT Zero Kick installation page at http://www.techtpaintball.com/hammer_install.html
Posted in Airsmith and Technical Info, Paintball Gun Upgrades, TechT Paintball | Tagged: Rear Bolt, TechT, TechT Installation, Techt Rear Bolt, TechT Trouble Shooting, Techt Zero Kick, TechT Zero Kick Hammer, Tippmann Bolt Upgrade, Tippmann Hammer, Zero Kick Hammer | Leave a Comment »
Posted by paintballtech on January 26, 2009
TechT has released a new rear bolt upgrade called the Zero Kick. It fits all Tippmanns including 98′s, A5′s, and X7′s. It’s also compatible with the BT4 and BT Delta guns. This new rear bolt is almost half the weight of the stock rear bolt greatly reducing the amount of kick in your gun. Because of the lighter weight, the bolt also moves back and forth quicker. This effectively increases your gun’s potential rate of fire. It weighs in at only 69.9 grams and is made out of a hardened material that gives it a longer wear life.
You can purchase the TechT Paintball Zero Kick Tippmann Rear Bolt here on TippmannParts.com.
Posted in New Releases, TechT Paintball | Tagged: BT Delta, BT4, TechT Bolt, TechT Paintball, Techt Rear Bolt, Techt Zero Kick, Tippmann 98, Tippmann A5, Tippmann X7, zero kick, Zero Kick Rear Bolt | Leave a Comment »