Paintball Gun Upgrades

New Products at TippmannParts.com

NewProducts

The Roc Stock is another great product from KillJoy Industries. This stock has the ability to be offset to the right or left side, allowing for greater mask clearance. Since it is able to be quickly adjusted with one hand, you can quickly set up one of the 36 possible configurations on the fly. Made of high grade machined Aluminum, the Roc Stock is made to last. The Roc Stock is currently available for the Tippmann A5 and X7.

The Zero Kick ACT Hammer from TechT is an upgraded hammer for any Tippmann ACT gun. Because of its 58% weight reduction from the stock hammer, the Zero Kick ACT Hammer gives you much less reciprocating mass inside the gun. This means the gun kicks less and cycles faster, which will help to improve your accuracy and your rate of fire.

Have your A5 or Model 98 professionally refinished by Conlee Custom with a DuraCoat camouflage.  These patterns are gorgeous.  They’ll make your gun STAND OUT off the field and BLEND IN on the field. If you’re adding this service to a gun you’re purchasing from us then it takes about 2 additional weeks for your gun to arrive to you. Expedited shipping and service is not available at this time. DuraCoat is a two part chemical coating. DuraCoat was specifically made for firearms so it easily stands up to the wear and tear of paintball. With normal use, a marker will last several lifetimes when refinished with DuraCoat. This service was available for the X7, but is now also available for the A5 and 98 Custom. It is available in Digital Woodland, Digital Desert, Digital Urban, MC Heavy Green, and Army ACU.

IVT – Integrated Valve Technology CO2 Tanks are the newest innovation from JT USA. The IVT CO2 tank features an internal magnetic float which represents your liquid CO2 fill level on the indicator strip. This allows you to know when you are running low so you don’t ever have to lose another game because you are out of gas. Also, the valve is located internally in the neck of the tank so even if you screw off the top of the tank, there is no chance of the tank shooting off and injuring anyone. These tanks will be a hot item at TippmannParts.com and are available in 9oz, 12oz, 20oz, and 24oz.

New TPX Accessories!

TPXAccTwo

If you are into the stealth look, then the 10″ Rifled Barrel with Special Ops Silencer from RAP 4 is perfect for you. It adds a great aftermarket look as well as better accuracy to the Tippmann TPX Pistol or any other A-5 threaded gun.

The 6″ Rifled Barrel w/ Frostbite Muzzle Break from RAP 4 adds a great aggressive look and better accuracy to the Tippmann TPX Pistol or any other A-5 threaded gun.
This weaver mounted accessory from RAP 4 is a perfect accent to any Tippmann TPX or compatible gun.The RAP4 Quick Disconnect Flashlight with Laser houses a super bright flashlight as well as a laser and is quickly attachable/detachable with a push of the pressure switch. Since this product is from RAP 4, you know that its capable of taking almost any type beating a paintball player can dish out.

The TPXtreme Spring Kit from TechT is a great upgrade for the extremely popular Tippmann TPX Pistol. This upgrade will allow the user’s TPX Pistol to get more shots per CO2 cartridge by increasing the efficiency and consistency of the gun. The TPXtreme Spring kit contains three different springs of three different tensions to give you the optimal setup for your TPX paintball pistol.

Also, TippmannParts.com has shipped all pre-orders on the TPX Pistol. This means that we currently have the Tippmann TPX Pistol as well as our Tippmann TPX Pistol Ranger Kit in stock and ready to ship. Don’t forget to purchase some extra clips, such as the Tippmann TPX Pistol Magazine 2 Pack. These magazines are currently in stock and ready to ship as well.

Conlee Custom Duracoat

7196

Conlee Custom DuraCoat Finish

Have your X7 professionally refinished by Conlee Custom with a DuraCoat camouflage. These patterns are gorgeous. They’ll make your gun STAND OUT off the field and BLEND IN on the field, so get your gun camo applied today. Currently available are the following patterns: Digital Woodland, Digital Desert, MC Heavy Green, Digital Urban, and Digital ACU. DuraCoat is a two part chemical coating.  DuraCoat was specifically made for firearms so it easily stands up to the wear and tear of paintball.  With normal use, a marker will last several lifetimes when refinished with DuraCoat.
Some Features of this process include:
  • Permanent
  • Specifically made for firearms
  • Guaranteed to be free from defects.
  • 2 week turnaround
  • 100% Customer Satisfaction Guaranteed
  • Will never rust or chip
  • Helps prevent mars and scratches

TechT Zero Kick Hammer Installation Guide Update

The newest version of the TechT Zero Kick Hammer for Tippmann Paintball Guns comes packaged with a new hammer drive spring. If you did not receive this drive spring and you think your marker needs it, please contact TechT. They will send you the drive spring for free. If you did not receive one, there is no need to freak out immediately. You may not need it. TechT found that some users’ markers needed a stiffer spring in order to get up to 300FPS. Most markers didn’t, but some did, so they started to include it with the hammer.

With that said, below are the instructions on how to install the hammer. Again, I would first set it up with your stock hammer drive spring. If you can not achieve high enough velocity or your cyclone is not cycling you will then need to swap out your stock spring for the stiffer one from TechT.

If you need to contact TechT for the stiff hammer drive spring please call – 901-405-1848 ex.11

For complete installtion instructions, visit the TechT Zero Kick installation page at http://www.techtpaintball.com/hammer_install.html

Free X7 Response Trigger or X7 Flatline Barrel with Tippmann X7 Paintball Gun Purchase

Tippmann X7 Paintball Gun with Free Response Kit or Flatline Barrel

Tippmann X7 Paintball Gun with Free Response Kit or Flatline Barrel

Tippmann Sports has another great promotion going on. It starts now and is good through the end of March, 2009.

With any Tippmann X7 Paintball Gun purchased you can get a FREE Tippmann X7 Response Trigger or a FREE Tippmann X7 Flatline Barrel. Now here’s the cool parts. This is a mail-in rebate program from Tippmann which means you buy the gun, and then fill out paperwork, and then send it in, and then wait for Tippmann to send you your upgrade. But at TippmannParts.com there is no wait and no mail-in rebate. Just choose the upgrade you want when you purchase the X7 gun. We’ll ship it at the same time a your gun. If you want, we can even install the Flatline or RT kit and test the gun before it ships out so you’re guaranteed to have everything working properly and ready to play when you take it out of the box.

This special is good on any of the Tippmann X7 guns including our already cheap packages and X7 gun Kits like the X7 M16. Just choose your free accessory. It’s that easy. Now just so you know . . . Since we’re taking care of the rebate part for you, you will NOT receive a mail-in rebate form and the UPC will be removed from your X7 Gun box.

The Tippmann X7 is one of the most versatile guns you can get.  You can make it look anyway you want.  This promo is a great way to get the gun and some cheap upgrades.  If you’ve been thinking about an X7, now is the time to buy.

Enjoy!

You can purchase Tippmann X7 Paintball Guns here at TippmannParts.com.

Virtue Crowns Now In Multiple Colors

Yellow Cab

Yellow Cab

Arctic White

Arctic White

Ruby Red

Ruby Red

Pink Fabulous

Pink Fabulous

Green Slimer Translucent Virtue Paintball Crown - Ultra Soft

Green Slimer Translucent Virtue Paintball Crown - Ultra Soft

Blue Ocean Translucent Virtue Paintball Crown

Blue Ocean Translucent Virtue Paintball Crown

The Virtue Crowns are now available in UltraSoft Grey, Blue, Green, Pink, Red, White, and Yellow.

The Virtue Crown Lidless feed system is the best way to get paint in to your paintball hopper and keep it there.  The hinged finger design lets the paint in but not out.  You don’t have to open a lid, just pour the balls straight from you pod and in to the hopper.  You can even shake the hopper upside down and the balls stay put. 

Virtue Crown Spec Sheet

Virtue Crown Spec Sheet

The Crowns are available in 3 styles:
Halo Style: Fits Odyssey Halo, ViewLoader Revolution, Empire Reloader, Empire Magna, Pulse, ViewLoader Force, or ViewLoader Eye Force Hoppers.
VLocity Style: Fits ViewLoader VLocity paintball hoppers.
VLocity Jr Style: Fits the ViewLoader VLocity Jr paintball loaders.

Each of these styles comes in a Standard or UltraSoft version.  The standard version lets the paint in and lets NO paintballs out.  Even with a vigorous upside down shake of your gun, you’re not going to lose any paint.  Perfect for player’s that dive in the snake or do a lot of moving and don’t want to waste that paint.  The UltraSoft version offers the fastest possible reload time by having slightly softer elastomer fingers.  Shake your hopper hard though and you might lose a few balls but much less than competitive lidless feeds.

Here are a few videos to see these awesome lids in action:
Ultra Soft Vs. Standard

Virtue Crown Ad – Where Oh Where Did My Paint Go?

7 Minute Walk Through – Review

You can buy the new colored Ultra Soft Virtue Crowns at TippmannParts.com

Stiffi MF Barrel Feb 5th Release Date

I just spoke with Stiffi and the release date on their new MF (Metal Free) barrels is February 5th, 2009.  They should start shipping them then and we should have them in stock ready to ship about a week later. 

Also an update.  The A5 version IS NOT available in the .689 bore size.  Stiffi doesn’t make any A5 barrels with .689 bores to accomodate the larger Tippmann bolts.

You can purchase any of Stiffi’s barrels, including the new Metal Free Barrel here, on TippmannParts.com .